Remove wooden dust, oil patches, paint, sawdust & other loose materials from the surface to be repaired.
Once SF-Wood putty had dried, it can be over-coated using all customary paint,stain varnished systems.

At least 6 months, if the original tins are kept closed.

Tools should be cleaned immediately after use with universal thinner.When set hard the Wood puttydifficult to be removed.

Use only in well ventilated rooms. Do not smoke, eat or drink during application. Keep away from children. When the ventilation is not adequate, suitable individual respiratory protection must be worn.

• From 10°C and up to 90% relative air humidity.
• The polyester Wood putty will not harden well at under +10°C
• Maximum filler thikness should not be exceed 6mm at a time,
• Alow curing time of 15-20 min.
• Recommmended grade of sand paper sequence: P 40,P 80,P 180 (Dry sanding)