Before starting to grout remove spacers and debris in grout joints and remove dust and dirt using a wet sponge. Do not leave water standing in joints. Dampen grout lines with a sponge prior to application for increased adhesion. After application of tile, allow 24-48 hours of dry time for the ceramic tile adhesive to dry. If grout is applied too quickly after setting tile, pinholes will form in the grout.

Mix 1 kg of grout to 0.25,0.30 litres of water.Mix the material thoroughly prior to application.Mix only with clean water in a clean container. Place water into a mixing container and then add the grout powder.Residue of the set material will be decreased in the set time.

Apply Tile Grout diagonally across the grout lines & make sure to fill the void completely.When the grout starts to set after 15-30 minutes,wipe the excess grout with a sponge.Then buff the tile with with a soft cloth after the material has dried to a haze. After few hours when the grout has dried outdoors or at high temperatures,the repeated dampening is recommended.

Apply the tile grout with a stiff rubber float???. Use a stiff sponge to wipe off the excess grout.

The Grout Should Completely fill the spaces in-between tiles. Fill the space only to the point where the side of the tile is covered.Do not over-fill the joints as the Tile Grout may break by loosening from the surface of the glazed tiles.

Tools & other equipment should be cleaned with water while the grout is still wet.

Keep out of the reach of children. Avoid contact with eyes.