• Iron, steel, aluminium, zinc plated sheet, glass fibre reinforced materials: Clean, derust and sand the surface, degrease with anti-silicone degreaser
• Old coatings:
  Remove by sanding all traces of old thermoplastic coats (nitrocellulose-based paint, 1K-acrylic coats) as well as acid-reacting coats and synthetic paints.

• From 10°C and up to 90% relative air humidity
• The polyester putty will not harden at under +10°C
• Maximum filler thickness should not exceed 4 mm at a time,
• Allow curing time of 20-30 min
• Recommmended grade of sand paper sequence: P 40, P 80, P 180 (Dry sanding)

At least 6 months if the original tins are kept closed.

• Use only in well ventilated rooms. Do not smoke, eat or drink during application. Keep away from children. When the ventilation is not adequate, suitable individual respiratory protection must be worn.

Tools should be cleaned immediately after use with universal thinner. When set hard the putty cannot be removed.